Updated Nov 22, 2026· 14 min read

Key takeaways

  • Compare five drill bit sets for wood, metal and masonry, from a 14-piece titanium set to a 29-piece cobalt set, and pick by material, size range and case.

A drill bit set decides whether a drill does the job cleanly or fights it. The wrong bit wanders across the surface, burns in hardwood, or snaps in sheet metal, while the right one cuts a clean hole with almost no effort. The five sets below cover the work most home workshops do: drilling wood for shelves and furniture, metal for brackets and repairs, and masonry for wall anchors. They range from a compact 14-piece titanium set to a 91-piece mixed kit that also covers driving.

Our top pick: DEWALT DW1361 Titanium Pilot Point Drill Bit Set, 21-Piece. Runner-up: Bosch MS4091C 91-Piece Drilling and Driving Mixed Bit Set.

Four of the five sets are twist-bit sets that run from 1/16 inch to 1/2 inch, which covers pilot holes, clearance holes, and anchor holes in one case. The fifth is a mixed drilling and driving set that trades the full twist-bit range for breadth, adding driver bits and masonry bits to the same box. Coatings are the dividing line: titanium nitride for everyday drilling, cobalt alloy for hard metal, and a mixed set for one box for the whole job.

As an Amazon Associate, we earn from qualifying purchases.

Table of Contents

Quick Answer

If you want one set for everyday drilling, the DEWALT DW1361 is the pick: 21 titanium nitride coated bits from 1/16 inch to 1/2 inch with a pilot point tip that starts cleanly in wood, metal, and plastic. For hard metal, the IRWIN 3018002 cobalt set is the stronger choice, and for masonry work plus driving, the Bosch MS4091C mixed set covers both jobs in one case.

DEWALT DW1361 Titanium Pilot Point Drill Bit Set, 21-Piece

The DEWALT DW1361 is the everyday set in this guide, covering the common sizes well instead of chasing the biggest piece count. Twenty-one titanium nitride coated bits run from 1/16 inch to 1/2 inch, which handles pilot holes, clearance holes, and anchor holes without a second set. The listing states the bits suit wood, metal, and plastic, so one case covers the three materials that fill most home projects.

The pilot point tip matters most in daily use. A standard twist bit can walk across a smooth surface before it bites, leaving a hole a fraction off the pencil line, and the pilot point tip starts on contact instead. That makes accurate drilling easier without a center punch. The titanium nitride coating extends bit life over plain high-speed steel, and the no-spin shanks keep the bit from slipping in the chuck.

The set includes spares of the smallest sizes, because the thin bits snap first. A 1/16-inch bit breaks easily if the drill tilts, and a second one in the case means the job does not stop for a replacement.

Buy this set first for a new workshop or to replace a worn-out bag of loose bits. It has no masonry bits, so brick and concrete need a separate masonry set or the Bosch mixed set, and it lacks the fine 1/64-inch steps of the 29-piece sets. For general drilling in wood, metal, and plastic, it is the most balanced pick here.

Specs

    • Brand: DEWALT
    • Model: DW1361
    • Pieces: 21
    • Material: Titanium nitride coated high-speed steel
    • Size range: 1/16 inch to 1/2 inch
    • Point style: Pilot Point
    • Shank: No-spin shank
    • Suitable materials: Wood, metal, and plastic
    • Case: Tough case with marked slots

    Bosch MS4091C 91-Piece Drilling and Driving Mixed Bit Set

    The Bosch MS4091C is the broadest set in this guide, and the only one that treats drilling and driving as a single job. Ninety-one pieces mix drill bits with driver bits in one case, so a project that needs a hole drilled and a screw driven can be done without swapping cases. The listing describes the set as ideal for applications in wood, metal, and masonry, which makes it the only pick here that covers masonry work directly.

    Breadth changes how a set gets used. Instead of a drawer of loose bits and a second box of screwdriver bits, one case holds the drilling and driving pieces together, each in its own slot. For a homeowner who drills a few holes, drives a few screws, and hangs a few wall anchors in the same afternoon, that organization is worth more than finer size steps.

    The trade-off is depth. A mixed set spreads its piece count across drilling and driving, so it lacks the full 1/64-inch size steps of a dedicated 29-piece twist-bit set, and a buyer who drills mostly metal will get more from the cobalt set. The MS4091C is also the bulkiest case here, so it suits a workshop shelf or a tool cabinet better than a small tool bag.

    Choose the MS4091C when you want one box for the whole job, including masonry and driving, rather than a specialist set for a single material. It is the best pick here for a first toolkit and for a household that does a little of everything.

    Specs

      • Brand: Bosch
      • Model: MS4091C
      • Pieces: 91
      • Type: Drilling and driving mixed bit set
      • Suitable materials: Wood, metal, and masonry
      • Case: Carrying case with organized slots

      IRWIN 3018002 M35 Cobalt Drill Bit Set, 29-Piece

      The IRWIN 3018002 is the metal-drilling specialist in this guide, and the pick when the material fights back. Twenty-nine bits made from M35 cobalt alloy steel run from 1/16 inch to 1/2 inch in 1/64-inch steps, so there is a bit for nearly every hole size a workshop needs, including the in-between sizes a 21-piece set skips. The cobalt alloy, with 5 percent cobalt in the steel, holds its edge at the heat hard metal generates, where ordinary high-speed steel bits dull quickly and start to smoke instead of cut.

      The 135-degree split point is the second reason this set suits metal. A split point centers itself on the mark and cuts on contact, so the bit does not wander across polished steel or stainless the way a standard point can. That matters on the jobs this set is built for: stainless steel, cast iron, and hardened metal, where a wandering bit leaves a scar and a dull bit leaves a work-hardened spot that is even harder to drill. The metal index case keeps the bits in order, and the marked slots make the size you need easy to find.

      Cobalt bits cost more than titanium coated bits, and this set is the premium-priced pick in the group, so it makes sense only if the work justifies it. For wood and soft plastic, a cobalt bit is more than the job needs, and the titanium sets here cut those materials just as cleanly. For a workshop that regularly drills steel brackets or stainless hardware, the cobalt set pays for itself in longer bit life and cleaner holes.

      Pick the IRWIN 3018002 when metal is the main material, not the occasional one.

      Specs

        • Brand: IRWIN
        • Model: 3018002
        • Pieces: 29
        • Material: M35 cobalt alloy steel, 5 percent cobalt
        • Size range: 1/16 inch to 1/2 inch in 1/64-inch increments
        • Point style: 135-degree split point
        • Suitable materials: Hard metal, stainless steel, cast iron, wood, and plastic
        • Case: Metal index case with removable indexed cartridge

        DEWALT DW1354 Titanium Drill Bit Set, 14-Piece

        The DEWALT DW1354 is the compact set in this guide, and the pick for a toolbox that has no room to spare. Fourteen titanium nitride coated bits run from 1/16 inch to 1/2 inch, the same size span as the 21-piece DEWALT set, with fewer in-between sizes. For a buyer who drills the common sizes and rarely needs a 1/64-inch step, the smaller set covers the work in a case that fits in a tool bag, a drawer, or the side pocket of a drill bag.

        Storage is where the DW1354 stands out. A patented bit-bar design holds each bit in its own bar, and a clear lid lets you see the bits at a glance without opening the case. The set works with the ToughCase+ storage system, so it connects to other ToughCase+ boxes and stacks neatly instead of sliding around loose in a bag. At 8.75 by 8.75 by 1.38 inches, the case is flat and square, which stacks better on a shelf than a deep clamshell case.

        The bits carry the same titanium nitride coating and pilot point tip as the larger DEWALT sets here, with a 135-degree cutting angle and a straight shank, and the listing states they suit metal, plastic, and wood. The tapered web design adds strength and cuts down on breakage, which matters in a small set where every bit counts and there are no spares of the smallest sizes. Like the larger DEWALT sets, the DW1354 has no masonry bits, so brick and concrete still need a dedicated masonry bit or the Bosch set.

        Choose the DW1354 when space matters as much as the bits themselves.

        Specs

          • Brand: DEWALT
          • Model: DW1354
          • Pieces: 14
          • Material: Titanium nitride coated
          • Size range: 1/16 inch to 1/2 inch
          • Point style: Pilot Point, 135-degree cutting angle
          • Shank: Straight
          • Suitable materials: Metal, plastic, and wood
          • Case: Bit-bar case with clear lid, ToughCase+ compatible
          • Case dimensions: 8.75 x 8.75 x 1.38 inches

          DEWALT DW1369 Titanium Pilot Point Drill Bit Set, 29-Piece

          The DEWALT DW1369 is the fullest titanium set in this guide, for a buyer who wants the complete size range without stepping up to cobalt. Twenty-nine titanium nitride coated bits run from 1/16 inch to 1/2 inch in 1/64-inch steps, so there is a bit for every size in the range, including the odd sizes a 21-piece set skips. That completeness matters when a hole must match a bolt, a dowel, or an anchor exactly: one 64th too small leaves a hole that needs reaming, and one 64th too large leaves a loose fit.

          The bits carry the same pilot point tip as the other DEWALT sets here, with a 135-degree cutting angle and a straight shank, and the listing states they suit wood, metal, and plastic. The pilot point starts the hole where you aim it and leaves a clean, burr-free edge, which shows on visible work such as furniture and shelving. The tough case holds the full set in marked slots, and at 3 pounds the cased set suits a workshop shelf.

          Compared with the 21-piece DW1361, the DW1369 adds eight more sizes and the fine steps between them, a real advantage for fitting work and for anyone who drills to a precise size. Compared with the IRWIN cobalt set, it covers the same size range in a coating that suits everyday wood, metal, and plastic drilling, without the extra cost of cobalt steel. The trade-off matches the other titanium sets: no masonry bits, so brick and concrete need a separate masonry set.

          Pick the DW1369 when you want the most complete titanium set in this guide and you drill to exact sizes.

          Specs

            • Brand: DEWALT
            • Model: DW1369
            • Pieces: 29
            • Material: Titanium nitride coated
            • Size range: 1/16 inch to 1/2 inch in 1/64-inch increments
            • Point style: Pilot Point, 135-degree cutting angle
            • Shank: Straight
            • Suitable materials: Wood, metal, and plastic
            • Case: Tough case with marked slots
            • Weight: 3 pounds
            • Case dimensions: 10 x 7 x 3.75 inches

            How to Choose

            Start with the material you drill most often, because the coating and the steel matter more than the piece count. Titanium nitride coated bits suit everyday drilling in wood, metal, and plastic, and they are the right choice for most home workshops. Cobalt alloy bits suit hard metal, stainless steel, and cast iron, where drilling heat dulls ordinary bits quickly, and they are worth the extra cost only if hard metal is regular work. If you drill brick, concrete, or block, you need masonry bits, and in this guide only the Bosch mixed set includes them, so plan for a separate masonry set if you pick a twist-bit-only set.

            Size range comes next. All four twist-bit sets here run from 1/16 inch to 1/2 inch, which covers pilot holes through anchor holes, so the difference is the steps in between. A 14-piece set covers the common sizes and keeps the case small, a 21-piece set adds spares of the thin bits that break first, and a 29-piece set fills in every 1/64-inch step for exact fitting work. If you mostly drill pilot and clearance holes, the 14-piece or 21-piece set is enough; if you fit bolts, dowels, and anchors to exact sizes, the 29-piece set earns its place.

            Point style decides how cleanly a hole starts. A pilot point tip starts on contact and resists walking on smooth surfaces, which helps on metal and finished wood where a stray mark shows. A 135-degree split point also centers itself and suits hard metal, which is why the cobalt set uses it. Either style beats a standard point, so check the point style before the brand name.

            Shank type and case design decide whether a set is pleasant to use. No-spin shanks grip better in the chuck and resist slipping under load, while a straight shank suits a keyed chuck and a drill press. A case with marked slots and a clear lid saves time on every job, because the size you need is easy to find and the bits stay organized.

            Finally, count the bits you will actually use before you count the pieces in the box. A 91-piece mixed set is the best value if you drill and drive in the same job, because it replaces two boxes with one. A 29-piece twist-bit set is the best value if you drill to exact sizes and never need driver bits. Match the set to the work, not to the biggest number on the box.

            Who Should Skip It

            A full drill bit set is the wrong purchase if you only drill one size of hole. If every job is a 1/8-inch pilot hole for a picture hook, a single bit and a small pack of spares will do, and a 29-piece set will sit unused. The same applies if you only drill masonry: a dedicated masonry set is a better buy, because twist bits are not made for brick and concrete.

            Skip the cobalt set if your work is mostly wood and plastic: on soft materials it costs more than a titanium coated bit that cuts just as cleanly. Skip the 91-piece mixed set if you already own a good driver-bit set and only need drill bits. And skip the 29-piece sets if your toolbox travels light: the larger cases suit a workshop shelf better than a small tool bag, and the 14-piece set covers the common sizes in a case that fits anywhere.

            Frequently Asked Questions

            What size drill bit set do I need for home use?

            A 21-piece set from 1/16 inch to 1/2 inch covers most home use, from pilot holes to clearance holes and anchor holes. A 14-piece set in the same range is enough if you drill only the common sizes, while a 29-piece set in 1/64-inch steps suits fitting work where a hole must match a bolt or dowel exactly.

            Can one drill bit set handle wood, metal, and masonry?

            No single twist-bit set in this guide covers all three materials. The titanium sets handle wood, metal, and plastic, and the cobalt set handles hard metal, but masonry needs a masonry bit with a carbide tip. The Bosch MS4091C mixed set is the only pick here that covers masonry, because it includes masonry bits alongside twist and driver bits.

            What is the difference between titanium and cobalt drill bits?

            Titanium nitride is a coating on high-speed steel that extends bit life and suits everyday drilling in wood, metal, and plastic. Cobalt is an alloy mixed into the steel itself, with 5 percent cobalt in the IRWIN set here, and it holds its edge at higher heat, which suits hard metal, stainless steel, and cast iron. Titanium coated bits are the better everyday buy, while cobalt bits suit regular metal work.

            How do I keep drill bits from wandering when I start a hole?

            Use a bit with a pilot point or a 135-degree split point, which starts on contact instead of skating across the surface. Mark the spot with a center punch on metal, start the drill slowly until the bit bites, and hold the drill square to the surface so the bit does not flex and snap. A sharp bit wanders less than a dull one, so replace bits that have lost their edge rather than forcing them.

            Conclusion

            The best drill bit set matches the material you drill most and the sizes you actually use. For everyday drilling in wood, metal, and plastic, the DEWALT DW1361 gives you 21 titanium bits with a pilot point tip and spares of the smallest sizes, and it is the pick most workshops should buy first. For hard metal and stainless, the IRWIN 3018002 cobalt set is stronger, with a full 1/64-inch size range and a split point that starts true. For masonry work and driving, the Bosch MS4091C mixed set covers both in one case. The DEWALT DW1354 suits a compact toolbox, and the DEWALT DW1369 suits exact fitting work. Pick the material first, check the size steps second, and the right set follows.

            Product and ASIN Reference

            Product ASIN
            DEWALT DW1361 Titanium Pilot Point Drill Bit Set, 21-Piece B004GIO0F8
            Bosch MS4091C 91-Piece Drilling and Driving Mixed Bit Set B0F6WFPP8P
            IRWIN 3018002 M35 Cobalt Drill Bit Set, 29-Piece B000BO9JMK
            DEWALT DW1354 Titanium Drill Bit Set, 14-Piece B0045PQ762
            DEWALT DW1369 Titanium Pilot Point Drill Bit Set, 29-Piece B0035XHWNW
            A
            affadmin
            We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
            Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
            Best Drill Bit Sets for Wood, Metal and…Check price on Amazon

            More from Amazon

            Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

            Amazon Prime

            Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

            Start a Prime free trial
            Amazon Music Unlimited

            Ad-free music streaming. Eligible new subscribers can start with a free trial.

            Try Music Unlimited free
            Prime for Young Adults

            A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

            See Prime for Young Adults
            Audible

            Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

            Try Audible free

            As an Amazon Associate we earn from qualifying purchases.