Key takeaways
- Find the best grill covers for gas and charcoal grills, from 22-inch kettle covers to 70-inch cart covers, with sizing and material guidance.
A grill left uncovered through rain, sun, dust, and falling leaves ages faster than one that stays covered between cooks. Moisture settles into burners and grates, sunlight fades paint and dries out plastic parts, and pollen and bird droppings add cleaning work before every meal. A fitted cover does not replace cleaning or a dry storage spot, but it keeps the worst of the weather off the cooking surface and the controls, so the grill is closer to ready the next time you light it.
This guide compares five grill covers sold on Amazon, sized from a 22-inch charcoal kettle cover to a 70-inch cart grill cover. Each pick lists its measured dimensions, material, and stated fit, so you can match the cover to your grill instead of guessing from a size name alone. Measure the width, depth, and height of your grill first, including side shelves and handles, then compare those numbers with the dimensions in each section below.
As an Amazon Associate, we earn from qualifying purchases.
Table of Contents
- Quick Answer
- Classic Accessories Veranda Water-Resistant 70-Inch BBQ Grill Cover
- Unicook 58-Inch Grill Cover for Weber Genesis II and Genesis 300 Series Grills
- Weber Grill Cover with Storage Bag for Genesis Gas Grills
- Amazon Basics Gas Grill Barbecue Cover, 60-Inch
- iCOVER Grill Cover for Weber 22-Inch Charcoal Kettle Grills
- How to Choose
- Who Should Skip It
- Frequently Asked Questions
- Conclusion
- Product and ASIN Reference
Quick Answer
The best grill cover for cart grills here is the Classic Accessories Veranda 70-inch cover for its large fit, vents, and padded handles, with the Amazon Basics 60-inch cover as the mid-size choice. Pick the Unicook 58-inch cover for a Genesis II or Genesis 300 fit, the Weber cover with a storage bag, and the iCOVER cover for a 22-inch charcoal kettle.
Classic Accessories Veranda Water-Resistant 70-Inch BBQ Grill Cover
The Classic Accessories Veranda 70-inch cover is the large-grill pick in this guide, built for cart grills that measure up to 70 inches long, 24 inches deep, and 48 inches high. The listing names Weber Genesis II model E-610 and Summit models E-420, E-470, S-420, and S-470 among the fits, along with grills from other common brands such as Brinkmann, Char-Broil, and JennAir. Measure the widest point including side shelves first, since a shelf that sticks out past the body can turn a close fit into a cover that will not close at the bottom.
The fabric is the Gardelle woven polyester used across the Veranda line, with a water-repellent and water-resistant laminated backing and a dark splash guard skirt at the bottom. Classic Accessories describes the cover as water-resistant rather than fully waterproof, which is an honest distinction worth keeping in mind. It is meant to shed rain and keep dust and sun off the grill, not to keep a grill dry under standing water.
Fit and handling get more attention here than on most covers in this guide. Air vents reduce condensation inside the cover and limit wind lofting, padded handles make it easier to pull the cover on and off, and an elastic hem cord with toggles lets you tighten the bottom around the grill. The closure is listed as buckle and drawstring. One limit is stated plainly in the listing: this cover is not designed to entirely cover the legs or wheels of the grill. For a large grill that stays outdoors all year, that weight and the vented design make it a strong premium choice.
Specs
- Dimensions: 70 x 24 x 48 inches
- Material: Polyester with water-repellent and water-resistant laminated backing
- Color: Pebble/Bark/Earth
- Item weight: 6 pounds
- Closure: Buckle and drawstring
- Features: Air vents, padded handles, elastic hem cord with toggles, splash guard skirt
- Stated fit: Weber Genesis II E-610, Summit E-420, E-470, S-420, and S-470, plus other brands
- Item model number: 73942
Unicook 58-Inch Grill Cover for Weber Genesis II and Genesis 300 Series Grills
The Unicook 58-inch cover is the model-specific pick in this guide, cut to match the Weber 7130 cover size for Genesis II, Genesis II LX 300 Series, and Genesis 300 Series gas grills. Its listed dimensions are 57.87 by 24.8 by 44.49 inches, which puts it in the middle of the size range here: large enough for a three-burner cart grill, but noticeably smaller than the 70-inch Veranda. That specific fit is the reason to choose it. A cover cut for your grill model drapes more neatly, leaves less loose fabric to catch the wind, and is less likely to pool water in a sagging fold.
The material is heavy-duty polyester with a waterproof vinyl coating, and the listing describes the cover as waterproof, fade resistant, and built to resist cracking in cold weather down to zero degrees Fahrenheit. The vinyl coating is the layer that does the water-shedding work, while the polyester underneath gives the cover its tear strength. Together they make this a practical all-season choice for a grill that lives on a patio through summer heat and winter cold, provided the cover is fitted snugly and the grill is on level ground where water can run off rather than collect.
Compatibility needs a careful read before ordering. Unicook states that this cover fits Genesis II, Genesis II LX 300 Series, and Genesis 300 Series grills, and that it does not fit Weber 2022 Genesis 300 Series grills. That exclusion is easy to miss if you only check the grill name and not the model year, so confirm the year and series of your Genesis before you buy. If your grill is a Genesis II or an older Genesis 300 and you want a cover that matches the factory 7130 dimensions, this is the most direct match in the guide.
Specs
- Dimensions: 57.87 x 24.8 x 44.49 inches
- Material: Polyester with vinyl coating
- Color: Black
- Stated fit: Weber Genesis II, Genesis II LX 300 Series, and Genesis 300 Series gas grills
- Does not fit: Weber 2022 Genesis 300 Series grills
- Compared to: Weber 7130 grill cover
- Item model number: W107130
Weber Grill Cover with Storage Bag for Genesis Gas Grills
The Weber cover in this guide is the brand-matched option for Genesis gas grills, sold by the grill maker itself with a storage bag included in the box. Its listed size is 44 by 60 inches, which places it among the larger cart grill covers here, suited to a Genesis grill with side shelves in place. Choosing the cover from the same brand as the grill removes much of the guesswork about fit, since the cover is cut for the grill shape it is meant to protect rather than for a generic rectangle of the same rough size. That matters most at the corners and around the lid handle, where a generic cover can bind or leave a gap.
The material is listed as polyester and vinyl, in black, which is the standard combination for a grill cover that needs to shed rain while staying flexible enough to pull on and off. Polyester gives the cover its structure and tear resistance, while the vinyl layer adds water resistance on the outside. Black is the practical color for a grill cover that will collect soot and dust, since marks show less than they do on a light cover, though it will absorb more heat in direct sun.
Because this is a Weber cover for Weber Genesis grills, the fit list is narrower than the universal covers in this guide, and that is both its strength and its limit. If you own a Genesis gas grill in the size this cover is made for, the match should be straightforward. If you own a grill from another brand, or a Genesis model outside the intended size, a universal cover with published dimensions will be easier to check against your measurements. The listing does not promise a fit for every Genesis model, so confirm your grill model and its width before ordering rather than assuming that any Weber cover fits any Weber grill.
Specs
- Listed size: 44 by 60 inches
- Material: Polyester, Vinyl
- Color: Black
- Includes: Storage bag
- Brand: Weber
- Intended for: Genesis gas grills
Amazon Basics Gas Grill Barbecue Cover, 60-Inch
The Amazon Basics 60-inch cover is the straightforward mid-size pick in this guide, made of woven polyester fabric with a laminated PVC undercoating that is meant to minimize rain seeping through. Its Product information dimensions are 60 by 26 by 46.06 inches, which suits a medium cart grill with side shelves folded or in place, depending on how wide the shelves make the grill.
One detail in this listing needs care, because the listing gives two different sets of dimensions. The Product information section lists 60 by 26 by 46.06 inches, while the product description gives overall dimensions of 65 by 26 by 50 inches, with a height at the front of 46 inches, and advises choosing a cover that measures at least 2 inches larger in length and width than the grill. Those two statements do not agree on length or height, so treat the Product information dimensions as the reference for this guide and measure your grill against both sets before ordering. If your grill sits close to either limit, size up to the next cover rather than hoping a tight fit will stretch.
The cover is listed in the medium size range, with the model number JC118. The woven polyester shell gives it a fabric feel rather than the slick surface of a vinyl-only cover, and the PVC undercoating is the layer that blocks rain. There is no storage bag, vent, or handle listed for this model, so the design is deliberately simple: a shaped cover that goes on, sheds rain, and comes off for cooking. That simplicity is the reason to choose it, provided you measure twice, allow the extra room the listing advises, and do not rely on the size name alone, since a cover labeled 60 inches can still be too short once side shelves and handles are counted.
Specs
- Dimensions: 60 x 26 x 46.06 inches
- Material: Woven polyester fabric with laminated PVC undercoating
- Color: Beige
- Size: Medium
- Item model number: JC118
iCOVER Grill Cover for Weber 22-Inch Charcoal Kettle Grills
The iCOVER kettle cover is the small-grill pick in this guide, and the only one shaped for a round charcoal kettle rather than a rectangular cart grill. Its listed dimensions are 26.5 by 26.5 by 36 inches, which fits a 22-inch charcoal kettle grill with room for the lid handle and the legs. That round shape matters: a rectangular cover draped over a kettle leaves folds that collect water and catch the wind, while a cover cut for a kettle follows the dome of the lid and hangs straight down the sides. If your main grill is a kettle, this is the cover shape to look for, not a cart cover in a small size.
The material is Oxford polyester in black, and the listing describes the cover as heavy-duty and waterproof, made for outdoor use on Weber and Char-Broil 22-inch charcoal kettle grills. Oxford polyester is a tighter weave than the plain polyester used in some lighter covers, which helps it hold its shape and resist snagging on the grill legs and the ash catcher.
At 8.4 ounces, this is by far the lightest cover in this guide, which reflects the smaller size and the thinner Oxford polyester rather than a lack of coverage. The trade-off is that a light cover needs its hem secured in wind, so check that the bottom sits snugly around the kettle legs and consider a cord around the base if your yard is exposed. This cover is not a substitute for a cart grill cover, and it should not be stretched over a rectangular grill in the hope that the extra length will cover the corners. For a household whose main grill is a 22-inch kettle, it is the right size, the right shape, and the easiest cover in this guide to handle.
Specs
- Dimensions: 26.5 x 26.5 x 36 inches
- Material: Oxford Polyester
- Color: Black
- Item weight: 8.4 ounces
- Stated fit: Weber and Char-Broil 22-inch charcoal kettle grills
How to Choose
Start with three measurements and write them down before you look at any cover. Measure the width of your grill from the outer edge of one side shelf or handle to the outer edge of the other, measure the depth from the front to the back including any rear shelf, and measure the height from the ground to the top of the lid handle with the lid closed. Compare all three numbers with the cover dimensions, not just the length, since a cover that is long enough but too shallow will not close at the bottom, and a cover that is wide enough but too short will leave the lid exposed. The Amazon Basics listing advises choosing a cover at least 2 inches larger in length and width than the grill, and that is a sound rule for every cover in this guide.
Next, match the cover shape to the grill shape. Cart grills need a rectangular cover with room for side shelves, while kettle grills need a round cover that follows the dome of the lid. The Veranda, Unicook, Weber, and Amazon Basics covers in this guide are rectangular cart covers, and the iCOVER is the round kettle cover. A model-specific cover such as the Unicook for Genesis II and Genesis 300 grills, or the Weber cover for Genesis grills, can fit more neatly than a universal cover of the same size, but only when your grill model and year match the fit list. The Unicook listing excludes 2022 Genesis 300 Series grills, which shows why the model year matters as much as the grill name.
Material decides how the cover handles rain, sun, and cold. Polyester with a vinyl or PVC coating, as on the Unicook, Weber, and Amazon Basics covers, sheds rain through the coating while the polyester underneath gives tear strength. The Veranda uses a woven polyester fabric with a water-repellent and water-resistant laminated backing, and it is described as water-resistant rather than waterproof, so expect it to shed rain without promising to keep a grill dry under standing water.
Who Should Skip It
Skip a fitted grill cover altogether if your grill lives in a dry garage or shed and only comes outside for cooking, since a cover adds little in a sheltered spot and can trap moisture if it is put on a grill that is still warm or damp. A cover is for outdoor storage between cooks, not for a grill that is already under a roof.
Skip the large cart covers in this guide if your grill is a kettle, a portable grill, or a small tabletop model, and skip the iCOVER kettle cover if your grill is a rectangular cart grill. Also skip a model-specific cover when your grill model or year is outside its fit list, and skip any cover that is too tight for your grill, even if it is the size you hoped would fit. A tight cover strains at the seams and leaves the bottom open to wind and rain, so size up and remember that the cart covers here are not designed to entirely cover the legs or wheels.
Frequently Asked Questions
What size grill cover do I need?
Measure the width, depth, and height of your grill with the lid closed, including side shelves, handles, and any rear shelf, then compare all three numbers with the cover dimensions. Choose a cover at least 2 inches larger in length and width than the grill, as the Amazon Basics listing advises.
Are grill covers waterproof?
It depends on the cover. The Unicook and iCOVER listings describe their covers as waterproof, while the Classic Accessories Veranda is described as water-resistant with a water-repellent and water-resistant backing, and the Amazon Basics cover uses a laminated PVC undercoating to minimize rain seeping through. No cover in this guide is meant to keep a grill dry under standing water, so fit it snugly on level ground where water can run off.
Can I leave a grill cover on all year?
Yes, if the cover fits well and the grill is on level ground in a spot where water can drain away. Vents help reduce condensation inside the cover, and a snug hem keeps wind from lifting it.
How do I keep a grill cover from blowing off in wind?
Choose the right size first, since a loose cover catches more wind than a snug one. Then use the closure the cover provides, such as the Veranda elastic hem cord with toggles and buckle and drawstring closure, or a drawstring hem on a universal cover.
Conclusion
The best grill cover is the one that matches your grill in size, shape, and material, and the five covers in this guide cover the most common cases. The Classic Accessories Veranda 70-inch cover suits large cart grills with its vented, heavy woven fabric and padded handles. The Unicook 58-inch cover is the direct match for Genesis II and older Genesis 300 grills. The Weber cover gives Genesis owners a brand-matched option with a storage bag. The Amazon Basics 60-inch cover is the simple mid-size choice, provided you measure against both dimension statements in its listing. The iCOVER kettle cover is the right shape for a 22-inch charcoal kettle.
A cover that fits well will keep rain, sun, and dust off the grill between cooks, and it will be easy enough to use that you actually put it back on after every meal. Check the dimensions one last time before ordering, since a cover that is even a few inches short will not close at the bottom. That habit, more than any single feature, is what keeps a grill in good shape through the seasons.
Product and ASIN Reference
| Product | ASIN |
|---|---|
| Classic Accessories Veranda Water-Resistant 70-Inch BBQ Grill Cover | B000HCLLMM |
| Unicook 58-Inch Grill Cover for Weber Genesis II and Genesis 300 Series Grills | B07XPVTRM9 |
| Weber Grill Cover with Storage Bag for Genesis Gas Grills | B00MBVDBC0 |
| Amazon Basics Gas Grill Barbecue Cover, 60-Inch | B00S13D31Q |
| iCOVER Grill Cover for Weber 22-Inch Charcoal Kettle Grills | B0C3QBBQZG |
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.






Write Your Review
No reviews yet. Be the first to share your experience!