Key takeaways
- Compare the best band saws for home workshops in 2026. Five benchtop picks for curved cuts, resawing, and small-shop woodworking, with specs that matter.
The WEN 3962 10-inch two-speed band saw is the best band saw for most home workshops, because it pairs a 3.5-amp motor with a 6-inch cutting depth, a 9-3/4-inch throat, and a stand in the box. If bench space is tight, the WEN 3959 9-inch model and the SKIL BW9501-00 give you the same curved-cut capability in a smaller footprint, while the RIKON 10-3061 suits woodworkers who want a cast iron table and a stronger motor for thicker stock.
This guide covers benchtop and homeowner-size band saws only, the kind that sit on a workbench or a small stand in a garage or basement shop. Every pick below is described from its listed specifications, so you can match throat width, cutting depth, motor size, blade speed, and table size to the projects you build, from cutting curves to resawing thin boards.
As an Amazon Associate, we earn from qualifying purchases.
Table of Contents
- Quick Answer
- WEN 3962 10-Inch Two-Speed Band Saw with Stand
- WEN 3959 9-Inch Benchtop Band Saw
- RIKON 10-3061 10-Inch Deluxe Bandsaw
- SKIL 3386-01 9-Inch Band Saw with Light
- SKIL BW9501-00 9-Inch Two-Speed Benchtop Band Saw
- How to Choose
- Who Should Skip It
- Frequently Asked Questions
- Conclusion
- Product and ASIN Reference
Quick Answer
Buy the WEN 3962 if you want the deepest cuts and a stand included. Pick the WEN 3959 or the SKIL BW9501-00 for a compact bench saw that still handles curves and light resawing. Choose the RIKON 10-3061 for a heavier cast iron table and a 1/2 HP motor, and the SKIL 3386-01 for a simple single-speed saw with a work light.
WEN 3962 10-Inch Two-Speed Band Saw with Stand
The WEN 3962 is the most capable saw in this guide, and the reason is simple: it cuts deeper and wider than any other pick here. Its 3.5-amp motor drives the blade at either 1520 or 2620 feet per minute, the slower speed for careful curved work, the faster speed for straight cuts through thicker boards. With a cutting depth of 6 inches and a throat of 9-3/4 inches, it handles resawing jobs that the 9-inch saws in this guide cannot, such as slicing a wide board in two. That extra depth is the main reason to give this saw floor space.
The work table is another strength. It measures 14-1/8 by 12-1/2 inches, it is made of cast aluminum, and it bevels up to 45 degrees for angled cuts. The saw takes 72-inch blades from 1/8 to 1/2 inches wide, so a narrow blade fits tight curves and a wider blade fits straight resawing, and a 3/8-inch blade comes in the box.
WEN includes the parts other makers sell separately: a stand, a fence, a miter gauge, a flexible work light, and a 3-in-1 dust port that fits 1-3/4, 2-3/4, and 4-inch hoses. The stand lifts the saw to working height and keeps it steady while you feed a long board through the blade. Connect the dust port to a shop vacuum, because a clear cut line makes curved work safer and more accurate.
The trade-off is size. With its stand, this saw occupies more floor space than any benchtop-only pick here, so measure your shop before you order. The table and the stand need assembly, and the blade guides need adjusting when you change blade widths. For a home workshop that cuts curves, resaws boards, and builds small furniture, though, the WEN 3962 gives you the widest working range in this guide, with a two-year warranty on the machine.
Specs
- Motor: 3.5-amp, corded electric
- Blade speeds: 1520 or 2620 FPM, two speeds
- Cutting capacity: 6 inches deep by 9-3/4 inches wide
- Blade length: 72 inches, widths from 1/8 to 1/2 inches
- Table: 14-1/8 x 12-1/2 inches, cast aluminum, bevels up to 45 degrees
- Included: stand, fence, miter gauge, work light, 3-in-1 dust port, 3/8-inch blade
- Warranty: 2-year limited warranty
WEN 3959 9-Inch Benchtop Band Saw
The WEN 3959 is the compact pick for a crowded bench. It has a 2.8-amp motor that spins the blade at up to 2500 feet per minute, and it cuts up to 3-1/2 inches deep and 9 inches wide, which covers curved cuts in thin stock, toy parts, and small boxes. It uses 59-1/2-inch blades from 1/8 to 3/8 inches wide, and the included 1/4-inch blade suits general curved work. At 40 pounds, it lifts off the bench and stores on a shelf, a real advantage in a small garage shop.
The table measures 12-1/4 by 11-7/8 inches and bevels up to 45 degrees, so angled cuts are covered. The package includes a rip fence, a miter gauge, a 2-1/2-inch dust port, and an adjustable blade guard with ball-bearing supports that keep the blade steady. Those are the same core accessories as the larger WEN 3962, sized down for a 9-inch saw.
This saw suits a woodworker who cuts curves and small parts and does not need to resaw thick boards. A 3-1/2-inch cutting depth handles most craft stock, and the single speed keeps operation simple: switch it on, guide the wood, and switch it off. There is no second speed to choose and no stand to assemble, and the two-year warranty matches the larger WEN.
The limits are clear. The cutting depth is nearly half that of the WEN 3962, so thick resawing is out of reach, and the 2.8-amp motor will bog down sooner in dense hardwood. The table is smaller, so long boards need extra support. If you plan to resaw wide boards often, step up to the WEN 3962 or the RIKON 10-3061 instead.
Specs
- Motor: 2.8-amp, 336 watts, corded electric
- Blade speed: up to 2500 FPM, single speed
- Cutting capacity: 3-1/2 inches deep by 9 inches wide
- Blade length: 59-1/2 inches, widths from 1/8 to 3/8 inches
- Table: 12-1/4 x 11-7/8 inches, bevels up to 45 degrees
- Included: 1/4-inch blade, rip fence, miter gauge, 2-1/2-inch dust port, adjustable blade guard with ball-bearing supports
- Weight: 40 pounds
- Warranty: 2-year warranty
RIKON 10-3061 10-Inch Deluxe Bandsaw
The RIKON 10-3061 is the heavy-duty pick in this guide. Its 1/2 HP motor draws 5.5 amps at 115 volts and runs at 1720 RPM, and it drives the blade at two speeds, 1515 or 3280 feet per minute, so you can match the speed to wood or to softer non-ferrous metals and plastics. The cutting height is 5 inches and the throat is 9-5/8 inches, between the compact 9-inch saws and the WEN 3962 for resawing depth. The 70-1/2-inch blade takes widths from 1/8 to 1/2 inches, and a 5/16-inch 6 TPI blade comes in the box.
The table is the standout feature. It is cast iron, it measures 13-3/4 by 12-1/2 inches, and it tilts 5 degrees left and 45 degrees right, more tilt range than the other saws here. Cast iron absorbs vibration better than a lighter table, and that steadiness shows up as smoother cuts. The saw also has tool-less blade guides, a quick-release blade tension lever, a two-position rip fence, viewing windows for checking blade tracking, and a 2-1/2-inch dust port, so adjustments are quick.
At 77.5 pounds, this is a saw you set in one place and leave there, and it needs a solid bench or the optional steel stand RIKON sells separately. The five-year warranty is the longest coverage in this guide. Note two things that are not in the box: a miter gauge and a work light. If you cut a lot of angled parts, add a miter gauge that fits the 5/8-inch table slot, and if your shop lighting is dim, add a clip-on light.
Choose the RIKON when you want the sturdiest benchtop saw here and you are willing to pay for that build with bench space and weight. It suits a woodworker who resaws boards up to 5 inches thick, cuts curves in hardwood, and wants tool-less adjustments. If you need the deepest cuts, the WEN 3962 still cuts a full inch deeper.
Specs
- Motor: 1/2 HP, 5.5 amps, 115 volts, 1720 RPM, corded electric
- Blade speeds: 1515 or 3280 FPM, two speeds
- Cutting capacity: 5 inches high by 9-5/8 inches wide
- Blade length: 70-1/2 inches, widths from 1/8 to 1/2 inches
- Table: 13-3/4 x 12-1/2 inches, cast iron, tilts 5 degrees left and 45 degrees right
- Included: 5/16-inch 6 TPI blade, two-position rip fence, tool-less blade guides, quick-release blade tension lever, 2-1/2-inch dust port
- Weight: 77.5 pounds
- Warranty: 5-year warranty
SKIL 3386-01 9-Inch Band Saw with Light
The SKIL 3386-01 is the simplest saw in this guide, and for a beginner that simplicity is the point. Its 2.5-amp motor runs at a single speed of 2800 feet per minute, so there is no speed setting to choose. It cuts up to 3-1/2 inches deep with a 9-inch throat, and it takes blades from 1/8 to 3/8 inches wide and 59-1/4 to 59-1/2 inches long. The included 6 TPI blade cuts a variety of wood, and the saw handles curved cuts, straight cuts, and small resawing jobs in thin stock.
The features that set it apart are aimed at visibility and setup. An articulating LED work light bends to shine on the cut line, which helps when you follow a pencil line around a curve. A rack and pinion table adjustment moves the table quickly to a new angle or height, and the table measures 12 by 11-3/4 inches. The package includes a rip fence, a miter gauge, and a 1-1/2-inch dust port, and EZ View blade tracking shows whether the blade runs true.
At about 31 pounds, this is the lightest saw in this guide, and it is easy to carry to the bench, use, and put away. The single speed is both the strength and the limit: it keeps the saw easy to run, but it gives you no slower setting for delicate work. The motor is also the smallest here at 2.5 amps, so feed thick hardwood slowly and let the blade do the work.
Pick the SKIL 3386-01 when you want a low-fuss first band saw for curves, crafts, and small projects, and when a built-in light and a light body matter more than a second speed or a deeper cut. If you will resaw boards thicker than 3-1/2 inches, look at the WEN 3962 or the RIKON 10-3061 instead, because no blade change can add cutting depth the saw does not have.
Specs
- Motor: 2.5-amp, 120 volts, corded electric
- Blade speed: 2800 FPM, single speed
- Cutting capacity: 3-1/2 inches deep, 9-inch throat
- Blade length: 59-1/4 to 59-1/2 inches, widths from 1/8 to 3/8 inches
- Table: 12 x 11-3/4 inches, rack and pinion adjustment
- Included: 6 TPI blade, rip fence, miter gauge, articulating LED work light, 1-1/2-inch dust port
- Weight: about 31 pounds
- Warranty: 3-year warranty
SKIL BW9501-00 9-Inch Two-Speed Benchtop Band Saw
The SKIL BW9501-00 is the newer two-speed option among the 9-inch saws here, and that second speed is its main advantage over the single-speed SKIL 3386-01. Its 2.8-amp motor runs on 120 volts and draws 336 watts, and the two speeds let you slow the blade for careful curved work and speed it up for straight cuts, the same idea behind the two-speed WEN and RIKON picks in a compact 9-inch body. At 38.6 pounds it is heavier than the 3386-01 but still light enough to move around the shop, and its steel base gives it a stable footing.
The listing describes a corded electric saw with a depth adjustment feature and a three-year limited warranty, and the box includes a dust port and a miter gauge. The saw is built for wood, and its 9-inch size fits the same work as the other 9-inch models here: curves, craft pieces, small boxes, and thin stock. If your bench is shared with other tools, a 9-inch saw you can lift aside is easier to live with.
One honest gap in the listed specifications is the resaw depth. SKIL does not list a cutting depth for this model in the specifications shown on its listing, so do not assume it matches the 3-1/2-inch depth of the other 9-inch saws here. Check the listing and the manual for that figure before you buy if resawing is a priority, and confirm the blade size from the manual before ordering replacements.
Choose the BW9501-00 when you want two speeds and a 2.8-amp motor in a compact saw, and when the three-year warranty matters to you. It is a sensible middle ground between the simple single-speed SKIL and the larger two-speed WEN 3962, for a home woodworker who wants more control without giving up bench space.
Specs
- Motor: 2.8-amp, 336 watts, 120 volts, corded electric
- Blade speeds: two speeds
- Size: 9-inch band saw
- Included: dust port, miter gauge
- Base: steel base
- Weight: 38.6 pounds
- Warranty: 3-year limited warranty
How to Choose
Start with cutting depth, because it decides what you can build. Cutting depth is the thickest board the saw can slice through in one pass, and in this guide it runs from 3-1/2 inches on the 9-inch saws to 5 inches on the RIKON and 6 inches on the WEN 3962. If you resaw boards for boxes or thin panels, pick the deepest cut you can fit. If you only cut curves in thin stock, a 3-1/2-inch depth is plenty.
Next, look at throat width, the distance from the blade to the frame, which decides how wide a board you can feed through. The saws here range from 9 inches to 9-3/4 inches, and that gap matters when you cut wide curves in a panel.
Motor size comes third. The picks here run from 2.5 amps to 5.5 amps, with the RIKON rated at 1/2 HP. A bigger motor holds its speed better in dense hardwood, while a smaller motor is fine for softwood and plywood. Two speeds add flexibility: a slow speed for tight curves and a fast speed for straight cuts. Single-speed saws are simpler, and for many beginners that simplicity is worth more.
Then check the table. A larger table supports longer boards, cast iron damps vibration better than cast aluminum, and a table that tilts to 45 degrees covers angled cuts. Also check what comes in the box: a fence, a miter gauge, a work light, and a dust port are all useful, and buying them separately adds hassle. Finally, weigh the saw against your bench: a 77.5-pound saw needs a solid bench and stays put, while a 31-pound saw can live on a shelf between uses.
Who Should Skip It
Skip a benchtop band saw if your main job is resawing wide hardwood boards thicker than 6 inches, because no saw in this guide cuts that deep. Skip it too if you mostly cut thick steel plate or masonry, since these saws are built for wood and softer materials, and forcing them through hard stock will stall the motor and dull the blade.
Skip it if you only need straight cuts. A circular saw or a table saw cuts straight lines faster, and a band saw earns its bench space by cutting curves. Skip a band saw too if you have no room for one: even the smallest pick here needs a clear bench area, a power outlet, and space to feed a board through, plus a way to clear the dust it makes.
Finally, skip the bigger picks if your shop is a shared space or a small apartment balcony. The WEN 3962 needs floor space for its stand, and the RIKON needs a strong bench for its weight. In that case, the compact 9-inch saws are the better fit, or no band saw at all until you have a proper bench.
Frequently Asked Questions
What size band saw is best for a home workshop?
A 9-inch or 10-inch benchtop band saw fits most home workshops, because it cuts curves and light resawing work without taking over the shop. The 9-inch models here cut 3-1/2 inches deep, which covers craft work, toys, and small boxes, while the 10-inch models cut 5 to 6 inches deep for resawing boards. Measure your bench first, then pick the largest cutting depth that fits.
Can a benchtop band saw cut thick hardwood?
It can cut hardwood up to its listed cutting depth, but feed the wood slowly and let the blade do the work. The WEN 3962 cuts 6 inches deep, the RIKON 10-3061 cuts 5 inches deep, and the 9-inch saws cut 3-1/2 inches deep. Hardwood thicker than the listed depth needs a larger floor-standing saw.
What blade size do these band saws use?
Each model takes its own blade length, so buy blades made for your exact model. The WEN 3962 uses 72-inch blades, the RIKON 10-3061 uses 70-1/2-inch blades, and the WEN 3959 and the SKIL 3386-01 use blades around 59-1/2 inches long. Narrow blades from 1/8 inch wide cut tight curves, while wider blades up to 1/2 inch wide cut straighter lines for resawing. Confirm the blade length for the SKIL BW9501-00 from its manual before ordering spares.
Do I need a stand for a benchtop band saw?
Not always. The WEN 3962 includes a stand in the box, and the RIKON 10-3061 has a steel stand sold separately. The 9-inch saws sit directly on a workbench, and their lighter weight makes them easy to lift aside when you need the bench. Whatever you choose, the bench or stand must be solid and level.
Conclusion
The best band saw for a home workshop matches your cutting depth, your bench space, and the projects you build most. The WEN 3962 leads this guide with its 6-inch cutting depth, two speeds, and included stand, the pick for woodworkers who resaw boards and want the widest range. The WEN 3959 and the two SKIL 9-inch saws cover curves and small work in a compact body, and the RIKON 10-3061 brings a cast iron table, a 1/2 HP motor, and the longest warranty here. Pick the depth you need, check the blade size and the weight against your bench, and you will end up with a saw that earns its place.
Product and ASIN Reference
| Product | Model | ASIN |
|---|---|---|
| WEN 10-Inch Two-Speed Band Saw with Stand | BA3962 | B016VD8GAA |
| WEN 9-Inch Benchtop Band Saw | BA3959 | B0BK2V91VW |
| RIKON 10-Inch Deluxe Bandsaw | 10-3061 | B07WRLZPGV |
| SKIL 9-Inch Band Saw with Light | 3386-01 | B009VJ3NNW |
| SKIL 9-Inch Two-Speed Benchtop Band Saw | BW9501-00 | B0BFR2BJQP |
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.






Write Your Review
No reviews yet. Be the first to share your experience!