Key takeaways
- AUTMATCH 3/4 inch D ring shackles offer 41,887 lbs break strength and a 4.75 ton working load for off-road recovery. Read the full review first.
A recovery shackle is a small piece of gear that carries a large responsibility. When a truck, Jeep, or SUV is stuck in mud, sand, or snow, the shackle links the tow strap or winch line to the vehicle, and it has to hold while heavy force passes through it. The AUTMATCH 3/4 inch D ring shackles, sold as a two-pack, are built for that job, with a published break strength of 41,887 lbs and a working load limit of 4.75 tons.
This review covers the red two-pack, model MSK001B, listed under ASIN B07FRH8FJC. Every figure here comes from the product listing, and anything the sources do not state is marked as not stated rather than filled in.
As an Amazon Associate, we earn from qualifying purchases.
Quick Answer
The AUTMATCH 3/4 inch D ring shackles are a two-pack of steel clevis shackles made for off-road vehicle recovery and towing. Each shackle has a 3/4 inch body, a 7/8 inch screw pin, a working load limit of 4.75 tons, and a break strength of 41,887 lbs. They suit drivers who carry a recovery kit and want a pair with isolator washers included.
Key Specs
| Spec | Detail |
|---|---|
| Brand | AUTMATCH |
| Model | 3/4 D Ring Shackle Red |
| Manufacturer part number | MSK001B |
| Color | Red |
| Shackle body size | 3/4 inch |
| Screw pin size | 7/8 inch |
| Material | Heavy duty drop forged steel |
| Fastener material | Alloy steel |
| Working load limit | 4.75 tons (10,471 lbs) |
| Break strength | 41,887 lbs (19 tons) |
| Finish | Galvanized and powder-coated |
| Pack contents | 2 shackles with shackle isolator washers kit |
| Product dimensions | 5.75 x 3.75 x 0.75 inches |
| Item weight | 4.8 pounds |
| Manufacturer | Qingdao Haimaicheng Trading Co., Ltd. |
| UPC | 734602730828 |
| Jaw opening width | not stated |
| Certification | not stated |
| Warranty | not stated |
Who It’s For
These shackles are for drivers who want recovery gear ready before they need it. Off-road drivers, overlanders, and anyone who travels on forest roads, beaches, or muddy tracks will find the format familiar: a pair of shackles, one for each side of the vehicle, or one for the stuck vehicle and one for the recovery vehicle. Most recoveries need two connection points, so a matched pair avoids mixing ratings.
Truck, SUV, and Jeep owners who already carry a tow strap or a winch will find these easy to add to a kit. The 7/8 inch screw pin is described as an industry-standard size, so it matches the recovery points and strap eyes most off-road setups use. The galvanized and powder-coated finish suits gear that lives in a truck bed or a recovery bag. The included isolator washers sit between the shackle and the mounting point, cutting rattling and helping protect bumpers and recovery points.
Who Should Skip It
Anyone needing a working load above 4.75 tons should look for larger or higher-rated gear instead. The headline figure of 41,887 lbs is the break strength, not the working load, and the safe working figure is the smaller one. Drivers of very heavy rigs should check their vehicle weight and strap ratings against that limit before buying.
These shackles are also not the right pick for overhead lifting. The listing describes them for vehicle recovery and towing, and nothing in the published information rates them for lifting loads overhead. Size matters too: the 3/4 inch body is a common middle ground, but drivers with smaller recovery points may find it bulky, while those with larger points may need a bigger shackle. Finally, this listing is the red version only, and each color is sold under its own separate listing, so the ASIN in this review applies to the red two-pack alone.
How It Compares
Most recovery shackles fall into a few broad groups, and the AUTMATCH pair sits in the middle. Smaller shackles, often built around a half inch body, are lighter and easier to store, but their published ratings are lower, so they suit lighter vehicles and lighter pulls. Larger shackles, built around a seven eighths inch or one inch body, carry higher ratings, but they are heavier and may not fit standard recovery points. The 3/4 inch size here is a common compromise for full-size trucks and SUVs.
Finish is the other point of comparison. Typical alternatives include forged steel shackles with a plain galvanized finish, which resist rust but can look rough after hard use, and shackles with a powder-coated finish, which add protection and color. This product combines both, with a galvanized layer under a powder-coated finish. Uncoated steel shackles sit at the other end of the scale: often cheaper, but they need more care to keep rust at bay.
Soft shackles are the main non-metal alternative. They are made from synthetic rope, weigh far less than steel, and cannot rattle or damage paint, but they need protection from sharp edges and abrasion, and they are not a drop-in replacement for a steel shackle in every setup. A steel D ring shackle like this one is the simpler choice for drivers who want a rigid metal connection. The included isolator washers also set this pack apart, since many shackles are sold with nothing but the shackles themselves.
Frequently Asked Questions
What is the difference between the 41,887 lbs break strength and the 4.75 ton working load?
The break strength of 41,887 lbs is the load at which the shackle is rated to fail. The working load limit of 4.75 tons, or 10,471 lbs, is the maximum load it is intended to carry in normal use, and it is the figure that matters when planning a recovery.
What size pin do these shackles use, and what do they connect to?
Each shackle has a 7/8 inch screw pin and a 3/4 inch body. The listing describes them for use with tow straps and winch lines in off-road recovery, connecting the strap or line to a vehicle recovery point. The exact strap width they accept is not stated.
Do the shackles come with isolator washers?
Yes. A shackle isolator washers kit is included with the two shackles. The isolators sit between the shackle and the mounting point to reduce rattling and help protect the finish of the recovery point.
Can these shackles be used for overhead lifting?
No, not according to the published information. The listing describes these shackles for vehicle recovery and towing, and nothing in the product information rates them for overhead lifting. Use them only for recovery and towing, within the stated working load limit.
Final Verdict
The AUTMATCH 3/4 inch D ring shackles are a straightforward recovery accessory: a matched pair of drop-forged steel shackles with a clear working load limit, a standard 7/8 inch pin, and isolator washers in the box. The published ratings are strong for the size, and the coated finish suits gear that lives in a truck bed or on a bumper.
The key point is the gap between the two headline numbers: 41,887 lbs is the break strength, and the number to plan around is the 4.75 ton working load limit. As long as the setup stays within that limit, and the shackles are used for recovery and towing rather than lifting, this pair is a solid addition to an off-road kit. Check the pin size against your recovery points before ordering, and inspect the shackles before each use.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.

Write Your Review
No reviews yet. Be the first to share your experience!